;
.
unit:BTU-PER-SEC-FT2
qudt:hasQuantityKind quantitykind:PowerPerArea ;
.
unit:BTU_IT
rdf:type qudt:EnergyAndWorkUnit ;
rdf:type qudt:ImperialUnit ;
rdf:type qudt:ThermalEnergyUnit ;
qudt:abbreviation "BtuIT" ;
qudt:code "0145" ;
qudt:conversionMultiplier "1055.05585262"^^xsd:double ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "\\(\\textit{British\\,Thermal\\,Unit}\\) (BTU or Btu) is a traditional unit of energy equal to about \\(1.0550558526 kilojoule\\). It is approximately the amount of energy needed to heat 1 pound (0.454 kg) of water from \\(39 \\,^{\\circ}{\\rm F}\\) (\\(39 \\,^{\\circ}{\\rm C}\\)) to \\(40 \\,^{\\circ}{\\rm F}\\) (\\(4.4 \\,^{\\circ}{\\rm C\"\\)). The unit is most often used in the power, steam generation, heating and air conditioning industries. In scientific contexts the BTU has largely been replaced by the SI unit of energy, the \\(joule\\), though it may be used as a measure of agricultural energy production (BTU/kg). It is still used unofficially in metric English-speaking countries (such as Canada), and remains the standard unit of classification for air conditioning units manufactured and sold in many non-English-speaking metric countries.
"^^rdf:HTML ;
qudt:id "U150-0145" ;
qudt:hasQuantityKind quantitykind:EnergyAndWork ;
qudt:hasQuantityKind quantitykind:ThermalEnergy ;
qudt:symbol "Btu_{it}" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "British Thermal Unit (International Definition)" ;
skos:prefLabel "british-thermal-unit-it" ;
prov:wasInfluencedBy ;
prov:wasInfluencedBy ;
prov:wasInfluencedBy ;
prov:wasInfluencedBy ;
.
unit:BTU_IT-FT-PER-FT2-HR-DEG_F
rdf:type qudt:DerivedUnit ;
rdf:type qudt:ImperialUnit ;
rdf:type qudt:ThermalConductivityUnit ;
qudt:abbreviation "Btu(IT) ft/(hr ft^2 degF)" ;
qudt:conversionMultiplier "1.730734666"^^xsd:double ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "\\(BTU_{IT}\\), Foot per Square Foot Hour Degree Fahrenheit is an Imperial unit for 'Thermal Conductivity' expressed as \\(Btu_{it} \\cdot ft/(hr \\cdot ft^2 \\cdot degF)\\).
"^^rdf:HTML ;
qudt:id "U-150-0165" ;
qudt:hasQuantityKind quantitykind:ThermalConductivity ;
qudt:symbol "Btu(IT)-ft/(hr-ft^2-degF)" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "BTU (IT) Foot per Square Foot Hour Degree Fahrenheit" ;
rdfs:seeAlso unit:BTU_TH-FT-PER-FT2-HR-DEG_F ;
skos:prefLabel "Btu(IT)-foot-per-square-foot-hour-degree-fahrenheit" ;
prov:wasInfluencedBy ;
prov:wasInfluencedBy ;
.
unit:BTU_IT-IN-PER-FT2-HR-DEG_F
rdf:type qudt:DerivedUnit ;
rdf:type qudt:ImperialUnit ;
rdf:type qudt:ThermalConductivityUnit ;
qudt:abbreviation "Btu(it)-in-per-hr-ft2-degF" ;
qudt:code "0175" ;
qudt:conversionMultiplier "0.144227889"^^xsd:double ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "\\(BTU_{th}\\) Inch per Square Foot Hour Degree Fahrenheit is an Imperial unit for 'Thermal Conductivity' expressed as \\(Btu_{it}-in/(hr-ft^{2}-degF)\\). An International British thermal unit inch per second per square foot per degree Fahrenheit is a unit of thermal conductivity in the US Customary Units and British Imperial Units. \\(1 Btu_{it} \\cdot in/(hr \\cdot ft^{2} \\cdot degF)\\) shows that one thermochemical BTU of heat per one hour moves through one square foot of material, which is one foot thick due to a temperature difference of one degree Fahrenheit.
"^^rdf:HTML ;
qudt:id "U-150-0175" ;
qudt:hasQuantityKind quantitykind:ThermalConductivity ;
qudt:symbol "Btu_{it} \\cdot in/(hr \\cdot ft^{2} \\cdot degF)" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "BTU (IT) Inch per Square Foot Hour Degree Fahrenheit" ;
rdfs:seeAlso unit:BTU_TH-IN-PER-FT2-HR-DegF ;
skos:prefLabel "btu(th)-inch-per-square-foot-hour-degree-fahrenheit" ;
prov:wasInfluencedBy ;
.
unit:BTU_IT-IN-PER-FT2-SEC-DEG_F
rdf:type qudt:DerivedUnit ;
rdf:type qudt:ImperialUnit ;
rdf:type qudt:ThermalConductivityUnit ;
qudt:abbreviation "Btu(it)-in-per-s-ft2-degF" ;
qudt:conversionMultiplier "519.220399911"^^xsd:double ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "BTU_{IT} Inch per Square Foot Second Degree Fahrenheit is an Imperial unit for 'Thermal Conductivity' expressed as \\(Btu_{it}-in/(ft^{2}-s-degF)\\).
"^^rdf:HTML ;
qudt:id "U-150-0180" ;
qudt:hasQuantityKind quantitykind:ThermalConductivity ;
qudt:symbol "Btu_{it}-in/(ft^{2}-s-degF)" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "BTU (IT) Inch per Square Foot Second Degree Fahrenheit" ;
skos:prefLabel "btu(it)-inch-per-square-foot-second-degree-fahrenheit" ;
prov:wasInfluencedBy ;
.
unit:BTU_IT-PER-DEG_F
rdf:type qudt:DerivedUnit ;
rdf:type qudt:HeatCapacityAndEntropyUnit ;
rdf:type qudt:ImperialUnit ;
qudt:abbreviation "Btu/degF" ;
qudt:code "0185" ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "British Thermal Unit (IT) Per Fahrenheit Degree (\\(Btu (IT)/^\\circ F\\)) is a measure of heat capacity. It can be converted to the corresponding standard SI unit J/K by multiplying its value by a factor of 1899.10534.
"^^rdf:HTML ;
qudt:id "U-150-0185" ;
qudt:hasQuantityKind quantitykind:HeatCapacity ;
qudt:symbol "BTU_{IT}/^\\circ F" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "BTU (IT) per Degree Fahrenheit" ;
skos:prefLabel "btu-it-per-degree-fahrenheit" ;
.
unit:BTU_IT-PER-LB
rdf:type qudt:DerivedUnit ;
rdf:type qudt:ImperialUnit ;
rdf:type qudt:SpecificEnergyUnit ;
rdf:type qudt:ThermalHeatCapacityUnit ;
qudt:abbreviation "Btu/lb" ;
qudt:code "0210" ;
qudt:conversionMultiplier 2.326E+03 ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "The amount of energy generated by a pound of substance is measured in British thermal units (IT) per pound. \\(1 Btu_{IT}/lb$ is equivalent to 2.326E+03 joule per kilogram (J/kg).
"^^rdf:HTML ;
qudt:id "U-150-0210" ;
qudt:hasQuantityKind quantitykind:SpecificEnergy ;
qudt:symbol "Btu_{IT}/lb" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "BTU-IT-PER-lb" ;
skos:prefLabel "btu-per-pound" ;
prov:wasInfluencedBy ;
prov:wasInfluencedBy ;
.
unit:BTU_TH
rdf:type qudt:EnergyAndWorkUnit ;
rdf:type qudt:ImperialUnit ;
rdf:type qudt:ThermalEnergyUnit ;
rdf:type qudt:Unit ;
qudt:abbreviation "BtuTH" ;
qudt:abbreviation "btu_th" ;
qudt:code "0145" ;
qudt:conversionMultiplier "1.0543502645"^^xsd:double ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "British Thermal Unit (thermochemical definition} (\\(BTU_{th}\\)) is a traditional unit of energy equal to about \\(1.0543502645 kilojoule\\). It is approximately the amount of energy needed to heat 1 pound (0.454 kg) of water from \\(39 \\,^{\\circ}{\\rm F}\\) (\\(39 \\,^{\\circ}{\\rm C}\\)) to \\(40 \\,^{\\circ}{\\rm F}\\) (\\(4.4 \\,^{\\circ}{\\rm C\"\\)). The unit is most often used in the power, steam generation, heating and air conditioning industries. In scientific contexts the BTU has largely been replaced by the SI unit of energy, the \\(joule\\).
"^^rdf:HTML ;
qudt:id "U150-0146" ;
qudt:hasQuantityKind quantitykind:EnergyAndWork ;
qudt:hasQuantityKind quantitykind:ThermalEnergy ;
qudt:symbol "Btu_{th}" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "British Thermal Unit (Thermochemical Definition)" ;
rdfs:seeAlso unit:BTU_IT ;
skos:prefLabel "british-thermal-unit-th" ;
prov:wasInfluencedBy ;
prov:wasInfluencedBy ;
prov:wasInfluencedBy ;
prov:wasInfluencedBy ;
.
unit:BTU_TH-FT-PER-FT2-HR-DEG_F
rdf:type qudt:DerivedUnit ;
rdf:type qudt:ImperialUnit ;
rdf:type qudt:ThermalConductivityUnit ;
qudt:abbreviation "Btu(IT) ft/(hr ft^2 degF)" ;
qudt:conversionMultiplier "1.729577206"^^xsd:double ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "\\(BTU_{TH}\\) Foot per Square Foot Hour Degree Fahrenheit is an Imperial unit for 'Thermal Conductivity' expressed as \\(Btu_{th} \\cdot ft/(hr \\cdot ft^2 \\cdot degF)\\).
"^^rdf:HTML ;
qudt:hasQuantityKind quantitykind:ThermalConductivity ;
qudt:symbol "Btu(TH)-ft/(hr-ft^2-degF)" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "BTU (TH) Foot per Square Foot Hour Degree Fahrenheit" ;
rdfs:seeAlso unit:BTU_IT-FT-PER-FT2-HR-DEG_F ;
skos:prefLabel "Btu(th)-foot-per-square-foot-hour-degree-fahrenheit" ;
prov:wasInfluencedBy ;
prov:wasInfluencedBy ;
.
unit:BTU_TH-IN-PER-FT2-HR-DEG_F
rdf:type qudt:DerivedUnit ;
rdf:type qudt:ImperialUnit ;
rdf:type qudt:ThermalConductivityUnit ;
qudt:abbreviation "Btu(th)-in-per-hr-ft2-degF" ;
qudt:code "0175" ;
qudt:conversionMultiplier "0.144131434"^^xsd:double ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "\\(BTU_{th}\\) Inch per Square Foot Hour Degree Fahrenheit is an Imperial unit for 'Thermal Conductivity' expressed as \\(Btu-in/(hr-ft^{2}-degF)\\). A thermochemical British thermal unit inch per second per square foot per degree Fahrenheit is a unit of thermal conductivity in the US Customary Units and British Imperial Units. \\(1 Btu_{th} \\cdot in/(hr \\cdot ft^{2 \\cdot degF)\\) shows that one thermochemical BTU of heat per one hour moves through one square foot of material, which is one foot thick due to a temperature difference of one degree Fahrenheit.
"^^rdf:HTML ;
qudt:id "U-150-0175" ;
qudt:hasQuantityKind quantitykind:ThermalConductivity ;
qudt:symbol "Btu_{th} \\cdot in/(hr \\cdot ft^{2} \\cdot degF)" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "BTU (TH) Inch per Square Foot Hour Degree Fahrenheit" ;
rdfs:seeAlso unit:BTU_IT-IN-PER-FT2-HR-DEG_F ;
skos:prefLabel "btu(th)-inch-per-square-foot-hour-degree-fahrenheit" ;
prov:wasInfluencedBy ;
.
unit:BTU_TH-IN-PER-FT2-SEC-DEG_F
rdf:type qudt:DerivedUnit ;
rdf:type qudt:ImperialUnit ;
rdf:type qudt:ThermalConductivityUnit ;
qudt:abbreviation "Btu(it)-in-per-s-ft2-degF" ;
qudt:conversionMultiplier "519.220399911"^^xsd:double ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "\\(BTU_{TH}\\) Inch per Square Foot Second Degree Fahrenheit is an Imperial unit for 'Thermal Conductivity' expressed as \\(Btu_{th} \\cdot in/(ft^{2} \\cdot s \\cdot degF)\\).
"^^rdf:HTML ;
qudt:id "U-150-0180" ;
qudt:hasQuantityKind quantitykind:ThermalConductivity ;
qudt:symbol "Btu_{th}-in/(ft^{2}-s-degF)" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "BTU (TH) Inch per Square Foot Second Degree Fahrenheit" ;
rdfs:seeAlso unit:BTU_IT-IN-PER-FT2-SEC-DEG_F ;
skos:prefLabel "btu(th)-inch-per-square-foot-second-degree-fahrenheit" ;
prov:wasInfluencedBy ;
.
unit:BTU_TH-PER-LB
rdf:type qudt:ImperialUnit ;
rdf:type qudt:ThermalHeatCapacityUnit ;
qudt:abbreviation "btu_th-per-lb" ;
qudt:conversionMultiplier 2.324443861E+03 ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "British Thermal Unit (therm.) Per Pound Mass (Btu (TH)/lbm) is a unit in the category of Thermal heat capacity. It is also known as Btu per pound, Btu/pound, Btu/lb. This unit is commonly used in the UK unit system. British Thermal Unit (therm.) Per Pound Mass (Btu (therm.)/lbm) has a dimension of L2T-2 where L is length, and T is time. It can be converted to the corresponding standard SI unit J/kg by multiplying its value by a factor of 2324.443861.
"^^rdf:HTML ;
qudt:symbol "Btu_{TH}/lb" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "British Thermal Unit (TH) Per Pound" ;
prov:wasInfluencedBy ;
prov:wasInfluencedBy ;
.
unit:CAL
qudt:code "0265" ;
qudt:conversionMultiplier "4184"^^xsd:double ;
qudt:description "Nutritional Calorie is a C.G.S System unit for 'Thermal Energy' expressed as \\(cal\\)." ;
qudt:id "U-150-0265" ;
qudt:symbol "Cal" ;
rdfs:label "Nutritional Calorie" ;
skos:prefLabel "nutritional-calorie" ;
.
unit:CAL-TH
rdf:type qudt:CGS-Unit ;
rdf:type qudt:EnergyAndWorkUnit ;
rdf:type qudt:ThermalEnergyUnit ;
qudt:abbreviation "cal" ;
qudt:code "0330" ;
qudt:conversionMultiplier "4.184"^^xsd:double ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "
The energy needed to increase the temperature of a given mass of water by \\(1 ^\\circ C$ at atmospheric pressure depends on the starting temperature and is difficult to measure precisely. Accordingly, there have been several definitions of the calorie. The two perhaps most popular definitions used in older literature are the \\(15 ^\\circ C$ calorie and the thermochemical calorie.
"^^rdf:HTML ;
qudt:id "U-150-0330" ;
qudt:latexDefinition """$1 \\; cal_{th} = 4.184 J$
$\\approx 0.003964 BTU$
$\\approx 1.163 \\times 10^{-6} kWh$
$\\approx 2.611 \\times 10^{19} eV$""" ;
qudt:hasQuantityKind quantitykind:EnergyAndWork ;
qudt:hasQuantityKind quantitykind:ThermalEnergy ;
qudt:symbol "cal_{th}" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Thermochemical Calorie" ;
skos:prefLabel "thermochemical-calorie" ;
prov:wasInfluencedBy ;
.
unit:CAL_IT-PER-G
rdf:type qudt:ImperialUnit ;
rdf:type qudt:ThermalHeatCapacityUnit ;
qudt:abbreviation "cal_it-per-g" ;
qudt:conversionMultiplier 4.1868E+03 ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "Calories produced per gram of substance.
"^^rdf:HTML ;
qudt:symbol "cal_{IT}/g" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "calorieIT per gram (calIT/g)" ;
prov:wasInfluencedBy ;
prov:wasInfluencedBy ;
.
unit:CAL_TH-PER-G
rdf:type qudt:EnergyAndWorkUnit ;
rdf:type qudt:ImperialUnit ;
rdf:type qudt:ThermalEnergyUnit ;
rdf:type qudt:ThermalHeatCapacityUnit ;
qudt:abbreviation "cal" ;
qudt:code "0330" ;
qudt:conversionMultiplier 4.184E+03 ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "Thermochemical Calorie. Calories produced per gram of substance.
"^^rdf:HTML ;
qudt:id "U-150-0330" ;
qudt:hasQuantityKind quantitykind:EnergyAndWork ;
qudt:hasQuantityKind quantitykind:ThermalEnergy ;
qudt:symbol "cal_{TH}/g" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "calorieTH per gram (calTH/g)" ;
skos:prefLabel "thermochemical-calorie" ;
prov:wasInfluencedBy ;
prov:wasInfluencedBy ;
.
unit:CLO
rdf:type qudt:CGS-Unit ;
rdf:type qudt:ThermalInsulanceUnit ;
rdf:type qudt:Unit ;
qudt:abbreviation "clo" ;
qudt:code "0390" ;
qudt:conversionMultiplier "0.155"^^xsd:double ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "A C.G.S System unit for Thermal Insulance expressed as \"clo\".
"^^rdf:HTML ;
qudt:id "U-150-0390" ;
qudt:hasQuantityKind quantitykind:ThermalInsulance ;
qudt:symbol "clo" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Clo" ;
skos:closeMatch ;
skos:prefLabel "clo" ;
.
unit:CM-SEC-DEG_C
rdf:type qudt:CGS-Unit ;
rdf:type qudt:DerivedUnit ;
rdf:type qudt:LengthTemperatureTimeUnit ;
rdf:type qudt:Unit ;
qudt:abbreviation "cm-s-degC" ;
qudt:code "2030" ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "Centimeter Second Degree Celsius is a C.G.S System unit for 'Length Temperature Time' expressed as \\(cm-s-degC\\).
"^^rdf:HTML ;
qudt:id "U-150-2030" ;
qudt:hasQuantityKind quantitykind:LengthTemperatureTime ;
qudt:symbol "cm-s-degC" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Centimeter Second Degree Celsius" ;
skos:prefLabel "centimeter-second-degree-celsius" ;
.
unit:DEG_C
rdf:type qudt:CGS-Unit ;
rdf:type qudt:DerivedUnit ;
rdf:type qudt:SI-Unit ;
rdf:type qudt:TemperatureUnit ;
qudt:abbreviation "degC" ;
qudt:baseUnitDimensions "K" ;
qudt:code "0515" ;
qudt:conversionMultiplier "1"^^xsd:double ;
qudt:conversionOffset "273.15"^^xsd:double ;
qudt:description "$\\textit{Celsius}$, also known as centigrade, is a scale and unit of measurement for temperature. It can refer to a specific temperature on the Celsius scale as well as a unit to indicate a temperature interval, a difference between two temperatures or an uncertainty. This definition fixes the magnitude of both the degree Celsius and the kelvin as precisely 1 part in 273.16 (approximately 0.00366) of the difference between absolute zero and the triple point of water. Thus, it sets the magnitude of one degree Celsius and that of one kelvin as exactly the same. Additionally, it establishes the difference between the two scales' null points as being precisely \\(273.15\\,^{\\circ}{\\rm C}\\)."^^rdf:HTML ;
qudt:guidance ;
qudt:guidance ;
qudt:id "U-150-0520" ;
qudt:latexDefinition "$\\,^{\\circ}{\\rm C}$" ;
qudt:hasQuantityKind quantitykind:CelciusTemperature ;
qudt:hasQuantityKind quantitykind:ThermodynamicTemperature ;
qudt:symbol "$\\,^{\\circ}{\\rm C}$" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Degree Celsius" ;
skos:altLabel "degree-centigrade" ;
skos:closeMatch ;
skos:exactMatch ;
skos:prefLabel "degree-celsius" ;
prov:wasInfluencedBy ;
.
unit:DEG_C-CM
rdf:type qudt:CGS-Unit ;
rdf:type qudt:LengthTemperatureUnit ;
qudt:abbreviation "cm-degC" ;
qudt:code "2008" ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "Degree Celsius Centimeter is a C.G.S System unit for 'Length Temperature' expressed as \\(cm-degC\\).
"^^rdf:HTML ;
qudt:id "U-150-2008" ;
qudt:hasQuantityKind quantitykind:LengthTemperature ;
qudt:symbol "cm-degC" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Degree Celsius Centimeter" ;
skos:prefLabel "degree-celsius-centimeter" ;
.
unit:DEG_C-PER-HR
rdf:type qudt:CGS-Unit ;
rdf:type qudt:TemperaturePerTimeUnit ;
rdf:type qudt:Unit ;
qudt:abbreviation "degC / hr" ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "Degree Celsius per Hour is a C.G.S System unit for 'Temperature Per Time' expressed as \\(degC / hr\\).
"^^rdf:HTML ;
qudt:hasQuantityKind quantitykind:TemperaturePerTime ;
qudt:symbol "degC / hr" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Degree Celsius per Hour" ;
skos:prefLabel "degree-celsius-per-hour" ;
.
unit:DEG_C-PER-MIN
rdf:type qudt:CGS-Unit ;
rdf:type qudt:TemperaturePerTimeUnit ;
rdf:type qudt:Unit ;
qudt:abbreviation "degC / m" ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "Degree Celsius per Minute is a C.G.S System unit for 'Temperature Per Time' expressed as \\(degC / m\\).
"^^rdf:HTML ;
qudt:hasQuantityKind quantitykind:TemperaturePerTime ;
qudt:symbol "degC / m" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Degree Celsius per Minute" ;
skos:prefLabel "degree-celsius-per-minute" ;
.
unit:DEG_C-PER-SEC
rdf:type qudt:CGS-Unit ;
rdf:type qudt:TemperaturePerTimeUnit ;
rdf:type qudt:Unit ;
qudt:abbreviation "degC / s" ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "Degree Celsius per Second is a C.G.S System unit for 'Temperature Per Time' expressed as \\(degC / s\\).
"^^rdf:HTML ;
qudt:hasQuantityKind quantitykind:TemperaturePerTime ;
qudt:symbol "degC / s" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Degree Celsius per Second" ;
skos:prefLabel "degree-celsius-per-second" ;
.
unit:DEG_F
rdf:type qudt:ImperialUnit ;
rdf:type qudt:TemperatureUnit ;
rdf:type qudt:Unit ;
qudt:abbreviation "degF" ;
qudt:code "0525" ;
qudt:conversionMultiplier 0.5555555555555555556E0 ;
qudt:conversionOffset 255.37037037037037037E0 ;
qudt:description "Degree Fahrenheit is an Imperial unit for 'Thermodynamic Temperature' expressed as \\(degF\\).
"^^rdf:HTML ;
qudt:id "U-150-0525" ;
qudt:hasQuantityKind quantitykind:ThermodynamicTemperature ;
qudt:symbol "degF" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Degree Fahrenheit" ;
skos:prefLabel "degree-fahrenheit" ;
.
unit:DEG_F-HR
rdf:type qudt:DerivedUnit ;
rdf:type qudt:ImperialUnit ;
rdf:type qudt:ThermalResistivityUnit ;
rdf:type qudt:Unit ;
qudt:abbreviation "degF-hr" ;
qudt:code "0530" ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "Degree Fahrenheit Hour is an Imperial unit for 'Thermal Resistivity' expressed as \\(degF-hr\\).
"^^rdf:HTML ;
qudt:id "U-150-0530" ;
qudt:hasQuantityKind quantitykind:ThermalResistivity ;
qudt:symbol "degF-hr" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Degree Fahrenheit Hour" ;
skos:prefLabel "degree-fahrenheit-hour" ;
.
unit:DEG_F-HR-PER-BTU
rdf:type qudt:DerivedUnit ;
rdf:type qudt:ImperialUnit ;
rdf:type qudt:ThermalResistanceUnit ;
rdf:type qudt:Unit ;
qudt:abbreviation "degF-hr/Btu" ;
qudt:code "0535" ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "Degree Fahrenheit Hour per BTU is an Imperial unit for 'Thermal Resistance' expressed as \\(degF-hr/Btu\\).
"^^rdf:HTML ;
qudt:id "U-150-0535" ;
qudt:hasQuantityKind quantitykind:ThermalResistance ;
qudt:symbol "degF-hr/Btu" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Degree Fahrenheit Hour per BTU" ;
skos:prefLabel "degree-fahrenheit-hour-per-btu" ;
.
unit:DEG_F-PER-HR
rdf:type qudt:CGS-Unit ;
rdf:type qudt:TemperaturePerTimeUnit ;
rdf:type qudt:Unit ;
qudt:abbreviation "degF / h" ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "Degree Fahrenheit per Hour is a C.G.S System unit for 'Temperature Per Time' expressed as \\(degF / h\\).
"^^rdf:HTML ;
qudt:hasQuantityKind quantitykind:TemperaturePerTime ;
qudt:symbol "degF / h" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Degree Fahrenheit per Hour" ;
skos:prefLabel "degree-fahrenheit-per-hour" ;
.
unit:DEG_F-PER-MIN
rdf:type qudt:CGS-Unit ;
rdf:type qudt:TemperaturePerTimeUnit ;
rdf:type qudt:Unit ;
qudt:abbreviation "degF / m" ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "Degree Fahrenheit per Minute is a C.G.S System unit for 'Temperature Per Time' expressed as \\(degF / m\\).
"^^rdf:HTML ;
qudt:hasQuantityKind quantitykind:TemperaturePerTime ;
qudt:symbol "^\\circ F / m" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Degree Fahrenheit per Minute" ;
skos:prefLabel "degree-fahrenheit-per-minute" ;
.
unit:DEG_F-PER-SEC
rdf:type qudt:CGS-Unit ;
rdf:type qudt:TemperaturePerTimeUnit ;
rdf:type qudt:Unit ;
qudt:abbreviation "degF / s" ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "Degree Fahrenheit per Second is a C.G.S System unit for 'Temperature Per Time' expressed as \\(degF / s\\).
"^^rdf:HTML ;
qudt:hasQuantityKind quantitykind:TemperaturePerTime ;
qudt:symbol "degF / s" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Degree Fahrenheit per Second" ;
skos:prefLabel "degree-fahrenheit-per-second" ;
.
unit:DEG_R
rdf:type qudt:CGS-Unit ;
rdf:type qudt:TemperatureUnit ;
rdf:type qudt:Unit ;
qudt:abbreviation "degR" ;
qudt:code "0545" ;
qudt:conversionMultiplier 0.5555555555555555556E0 ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "Rankine is a thermodynamic (absolute) temperature scale. The symbol for degrees Rankine is \\(^\\circ R$ (or \\(^\\circ Ra$ if necessary to distinguish it from the Rømer and Réaumur scales). Zero on both the Kelvin and Rankine scales is absolute zero, but the Rankine degree is defined as equal to one degree Fahrenheit, rather than the one degree Celsius used by the Kelvin scale. A temperature of \\(-459.67 ^\\circ F$ is exactly equal to \\(0 ^\\circ R\\).
"^^rdf:HTML ;
qudt:id "U-150-0545" ;
qudt:hasQuantityKind quantitykind:ThermodynamicTemperature ;
qudt:symbol "degR" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Degree Rankine" ;
skos:prefLabel "degree-rankine" ;
prov:wasInfluencedBy ;
.
unit:DEG_R-PER-HR
rdf:type qudt:CGS-Unit ;
rdf:type qudt:TemperaturePerTimeUnit ;
rdf:type qudt:Unit ;
qudt:abbreviation "degR / h" ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "A rate of change of temperature measured in degree Rankine in periods of one hour.
"^^rdf:HTML ;
qudt:isScalingOf unit:DegR-PER-MIN ;
qudt:hasQuantityKind quantitykind:TemperaturePerTime ;
qudt:symbol "degR / h" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Degree Rankine per Hour" ;
skos:prefLabel "degree-rankine-per-hour" ;
.
unit:DEG_R-PER-MIN
rdf:type qudt:CGS-Unit ;
rdf:type qudt:TemperaturePerTimeUnit ;
rdf:type qudt:Unit ;
qudt:abbreviation "degR / m" ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "A rate of change of temperature measured in degree Rankine in periods of one minute
"^^rdf:HTML ;
qudt:isScalingOf unit:DegR-PER-SEC ;
qudt:hasQuantityKind quantitykind:TemperaturePerTime ;
qudt:symbol "degR / m" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Degree Rankine per Minute" ;
skos:prefLabel "degree-rankine-per-minute" ;
.
unit:DEG_R-PER-SEC
rdf:type qudt:CGS-Unit ;
rdf:type qudt:TemperaturePerTimeUnit ;
rdf:type qudt:Unit ;
qudt:abbreviation "degR / s" ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "A rate of change of temperature measured in degree Rankine in periods of one second.
"^^rdf:HTML ;
qudt:hasQuantityKind quantitykind:TemperaturePerTime ;
qudt:symbol "degR / s" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Degree Rankine per Second" ;
skos:prefLabel "degree-rankine-per-second" ;
.
unit:EV-PER-K
rdf:type qudt:CGS-Unit ;
rdf:type qudt:HeatCapacityAndEntropyUnit ;
rdf:type qudt:Unit ;
qudt:abbreviation "ev/K" ;
qudt:conversionMultiplier 1.6021765314E-19 ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "Electron Volt per Kelvin is a C.G.S System unit for 'Heat Capacity' expressed as \\(ev/K\\).
"^^rdf:HTML ;
qudt:hasQuantityKind quantitykind:HeatCapacity ;
qudt:symbol "eV K^{-1}" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Electron Volt per Kelvin" ;
skos:prefLabel "electron-volt-per-kelvin" ;
.
unit:FT2-DEG_F
rdf:type qudt:AreaTemperatureUnit ;
rdf:type qudt:DerivedUnit ;
rdf:type qudt:ImperialUnit ;
rdf:type qudt:Unit ;
qudt:abbreviation "ft^{2}-degF" ;
qudt:code "1675" ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "Square Foot Degree Fahrenheit is an Imperial unit for 'Area Temperature' expressed as \\(ft^{2}-degF\\).
"^^rdf:HTML ;
qudt:id "U-150-1675" ;
qudt:hasQuantityKind quantitykind:AreaTemperature ;
qudt:symbol "ft^{2}-degF" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Square Foot Degree Fahrenheit" ;
skos:prefLabel "square-foot-degree-fahrenheit" ;
.
unit:FT2-HR-DEG_F
rdf:type qudt:AreaTimeTemperatureUnit ;
rdf:type qudt:DerivedUnit ;
rdf:type qudt:ImperialUnit ;
rdf:type qudt:Unit ;
qudt:abbreviation "ft^{2}-hr-degF" ;
qudt:code "0845" ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "Square Foot Hour Degree Fahrenheit is an Imperial unit for 'Area Time Temperature' expressed as \\(ft^{2}-hr-degF\\).
"^^rdf:HTML ;
qudt:id "U-150-0845" ;
qudt:hasQuantityKind quantitykind:AreaTimeTemperature ;
qudt:symbol "ft^{2}-hr-degF" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Square Foot Hour Degree Fahrenheit" ;
skos:prefLabel "square-foot-hour-degree-fahrenheit" ;
.
unit:FT2-HR-DEG_F-PER-BTU
rdf:type qudt:DerivedUnit ;
rdf:type qudt:ImperialUnit ;
rdf:type qudt:ThermalInsulanceUnit ;
rdf:type qudt:Unit ;
qudt:abbreviation "sqft-hr-degF/btu" ;
qudt:code "0540" ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "Square Foot Hour Degree Fahrenheit per BTU is an Imperial unit for 'Thermal Insulance' expressed as \\((degF-hr-ft^{2})/Btu\\).
"^^rdf:HTML ;
qudt:id "U-150-0540" ;
qudt:hasQuantityKind quantitykind:ThermalInsulance ;
qudt:symbol "(degF-hr-ft^{2})/Btu" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Square Foot Hour Degree Fahrenheit per BTU" ;
skos:prefLabel "square-foot-hour-degree-fahrenheit-per-btu" ;
.
unit:FT2-PER-BTU-IN
rdf:type qudt:DerivedUnit ;
rdf:type qudt:ImperialUnit ;
rdf:type qudt:ThermalResistivityUnit ;
rdf:type qudt:Unit ;
qudt:abbreviation "ft2-per-btu-in" ;
qudt:code "1680" ;
qudt:conversionMultiplier "0.00346673589"^^xsd:double ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:id "U-150-1680" ;
qudt:hasQuantityKind quantitykind:ThermalResistivity ;
qudt:symbol "ft^{2}/(Btu-in)" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Square Foot per BTU Inch" ;
skos:prefLabel "square-foot-per-btu-inch" ;
.
unit:FT2-PER-HR
rdf:type qudt:DerivedUnit ;
rdf:type qudt:ImperialUnit ;
rdf:type qudt:KinematicViscosityUnit ;
rdf:type qudt:ThermalDiffusivityUnit ;
rdf:type qudt:Unit ;
qudt:abbreviation "ft^{2}/hr" ;
qudt:code "1690" ;
qudt:conversionMultiplier 2.58064E-5 ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "Square Foot per Hour is an Imperial unit for \\(\\textit{Kinematic Viscosity}\\) and \\(\\textit{Thermal Diffusivity}\\) expressed as \\(ft^{2}/hr\\).
"^^rdf:HTML ;
qudt:id "U-150-1690" ;
qudt:hasQuantityKind quantitykind:KinematicViscosity ;
qudt:hasQuantityKind quantitykind:ThermalDiffusivity ;
qudt:symbol "ft^{2}/hr" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Square Foot per Hour" ;
skos:prefLabel "square-foot-per-hour" ;
.
unit:FT2-SEC-DEG_F
rdf:type qudt:AreaTimeTemperatureUnit ;
rdf:type qudt:DerivedUnit ;
rdf:type qudt:ImperialUnit ;
rdf:type qudt:Unit ;
qudt:abbreviation "ft^{2}-s-degF" ;
qudt:code "1610" ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "Square Foot Second Degree Fahrenheit is an Imperial unit for 'Area Time Temperature' expressed as \\(ft^{2}\\cdot s\\cdot degF\\).
"^^rdf:HTML ;
qudt:id "U-150-1610" ;
qudt:hasQuantityKind quantitykind:AreaTimeTemperature ;
qudt:symbol "ft^{2}-s-degF" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Square Foot Second Degree Fahrenheit" ;
skos:prefLabel "square-foot-second-degree-fahrenheit" ;
.
unit:G-PER-DEG_C
rdf:type qudt:CGS-Unit ;
rdf:type qudt:MassTemperatureUnit ;
rdf:type qudt:Unit ;
qudt:abbreviation "g-degC" ;
qudt:code "2020" ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "Gram Degree Celsius is a C.G.S System unit for 'Mass Temperature' expressed as \\(g \\cdot degC\\).
"^^rdf:HTML ;
qudt:id "U-150-2020" ;
qudt:hasQuantityKind quantitykind:MassTemperature ;
qudt:symbol "g-degC" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Gram Degree Celsius" ;
skos:prefLabel "gram-degree-celsius" ;
.
unit:HZ-PER-K
rdf:type qudt:ThermodynamicsUnit ;
rdf:type qudt:Unit ;
qudt:abbreviation "Hz K^{-1}" ;
qudt:conversionMultiplier "1"^^xsd:double ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "Hertz per Kelvin is a unit for 'Inverse Time Temperature' expressed as \\(Hz K^{-1}\\).
"^^rdf:HTML ;
qudt:hasQuantityKind quantitykind:InverseTimeTemperature ;
qudt:symbol "Hz K^{-1}" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Hertz per Kelvin" ;
skos:prefLabel "hertz-per-kelvin" ;
.
unit:J-M-PER-MOL
rdf:type qudt:ChemistryUnit ;
qudt:abbreviation "J m mol^{-1}" ;
qudt:code "0913" ;
qudt:conversionMultiplier "1"^^xsd:double ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "Joule Meter per Mole is a unit for 'Length Molar Energy' expressed as \\(J \\cdot m \\cdot mol^{-1}\\).
"^^rdf:HTML ;
qudt:id "U-030-0913" ;
qudt:hasQuantityKind quantitykind:LengthMolarEnergy ;
qudt:symbol "J m mol^{-1}" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Joule Meter per Mole" ;
skos:prefLabel "joule-meter-per-mole" ;
.
unit:J-PER-K
rdf:type qudt:DerivedUnit ;
rdf:type qudt:HeatCapacityAndEntropyUnit ;
rdf:type qudt:Unit ;
qudt:abbreviation "J/K" ;
qudt:conversionMultiplier 1.0e0 ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "Joule Per Kelvin (J/K) is a unit in the category of Entropy. It is also known as joules per kelvin, joule/kelvin. This unit is commonly used in the SI unit system. Joule Per Kelvin (J/K) has a dimension of \\(ML^{2}T^{-2}Q^{-1}$ where \\(M$ is mass, L is length, T is time, and Q is temperature. This unit is the standard SI unit in this category.
"^^rdf:HTML ;
qudt:hasQuantityKind quantitykind:HeatCapacity ;
qudt:symbol "J K^{-1}" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Joule per Kelvin" ;
skos:prefLabel "joule-per-kelvin" ;
.
unit:J-PER-KG
rdf:type qudt:DerivedUnit ;
rdf:type qudt:SpecificEnergyUnit ;
rdf:type qudt:Unit ;
qudt:abbreviation "J/kg" ;
qudt:baseUnitDimensions "L2T^{-2}" ;
qudt:code "0900" ;
qudt:conversionMultiplier 1.0e0 ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "Joule Per Kilogram} (\\(J/kg\\)) is a unit in the category of Thermal heat capacity. It is also known as \\textit{joule/kilogram}, \\textit{joules per kilogram}. This unit is commonly used in the SI unit system. The unit has a dimension of \\(L2T^{-2}\\) where \\(L\\) is length, and \\(T\\) is time. This unit is the standard SI unit in this category.
"^^rdf:HTML ;
qudt:id "U-150-0900" ;
qudt:hasQuantityKind quantitykind:SpecificEnergy ;
qudt:symbol "J/kg" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Joule per Kilogram" ;
skos:prefLabel "joule-per-kilogram" ;
.
unit:J-PER-KG-K
rdf:type qudt:DerivedUnit ;
rdf:type qudt:SpecificHeatCapacityUnit ;
qudt:abbreviation "J-per-kgK" ;
qudt:code "0905" ;
qudt:conversionMultiplier 1.0e0 ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "Specific heat capacity - The heat required to raise unit mass of a substance by unit temperature interval under specified conditions, such as constant pressure: usually measured in joules per kelvin per kilogram. Symbol \\(c_p\\) (for constant pressure) Also called specific heat.
"^^rdf:HTML ;
qudt:id "U-150-0905" ;
qudt:hasQuantityKind quantitykind:SpecificHeatCapacity ;
qudt:symbol "J/(kg \\cdot K)" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Joule per Kilogram Kelvin" ;
skos:prefLabel "joule-per-kilogram-kelvin" ;
.
unit:J-PER-KG-K-M3
rdf:type qudt:DerivedUnit ;
rdf:type qudt:SpecificHeatVolumeUnit ;
rdf:type qudt:Unit ;
qudt:abbreviation "j-per-kg-k-m3" ;
qudt:code "2032" ;
qudt:conversionMultiplier 1.0e0 ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:id "U-150-2032" ;
qudt:hasQuantityKind quantitykind:SpecificHeatCapacityAtConstantVolume ;
qudt:symbol "J/(kg-K-m^3)" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Joule per Kilogram Kelvin Cubic Meter" ;
skos:prefLabel "joule-per-kilogram-kelvin-cubic-meter" ;
.
unit:J-PER-KG-K-PA
rdf:type qudt:DerivedUnit ;
rdf:type qudt:SpecificHeatPressureUnit ;
rdf:type qudt:Unit ;
qudt:abbreviation "j-per-kg-k-pa" ;
qudt:code "2034" ;
qudt:conversionMultiplier 1.0e0 ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:id "U-150-2034" ;
qudt:hasQuantityKind quantitykind:SpecificHeatCapacityAtConstantPressure ;
qudt:symbol "J/(km.K.Pa)" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Joule per Kilogram Kelvin per Pascal" ;
skos:prefLabel "joule-per-kilogram-kelvin-pascal" ;
.
unit:J-PER-M2
rdf:type qudt:DerivedUnit ;
rdf:type qudt:EnergyPerAreaUnit ;
qudt:abbreviation "J/m^2" ;
qudt:code "0920" ;
qudt:conversionMultiplier 1.0e0 ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:id "U150E0920" ;
qudt:symbol "J/m^{2}" ;
qudt:uneceCommonCode "B13" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Joule per Square Meter" ;
skos:prefLabel "joule-per-square-meter" ;
.
unit:J-PER-M3
rdf:type qudt:DerivedUnit ;
rdf:type qudt:EnergyDensityUnit ;
qudt:abbreviation "j-per-m3" ;
qudt:code "0890" ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "Joule Per Cubic Meter (\\(J/m^{3}\\)) is a unit in the category of Energy density. It is also known as joules per cubic meter, joule per cubic metre, joules per cubic metre, joule/cubic meter, joule/cubic metre. This unit is commonly used in the SI unit system. It has a dimension of \\(ML^{-1}T^{-2}\\) where \\(M\\) is mass, \\(L\\) is length, and \\(T\\) is time. This unit is the standard SI unit in this category.
"^^rdf:HTML ;
qudt:id "U-150-0890" ;
qudt:symbol "J/m^{3}" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Joule per Cubic Meter" ;
skos:prefLabel "joule-per-cubic-meter" ;
.
unit:J-PER-M3-K
rdf:type qudt:DerivedUnit ;
rdf:type qudt:EnergyDensityUnit ;
qudt:abbreviation "J/(m^{3} K)" ;
qudt:conversionMultiplier 1.0e0 ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "Joule per Cubic Meter Kelvin is a unit for 'Volumetric Heat Capacity' expressed as \\(J/(m^{3} K)\\).
"^^rdf:HTML ;
qudt:symbol "J/(m^{3} K)" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Joule per Cubic Meter Kelvin" ;
skos:prefLabel "joule-per-cubic-meter-kelvin" ;
.
unit:J-PER-M4
rdf:type qudt:DerivedUnit ;
rdf:type qudt:EnergyDensityUnit ;
rdf:type qudt:Unit ;
qudt:abbreviation "J/m^4" ;
qudt:code "0890" ;
qudt:conversionMultiplier 1.0e0 ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "Joule Per Quartic Meter (\\(J/m^4\\)) is a unit for the spectral concentration of radiant energy density (in terms of wavelength), or the spectral radiant energy density (in terms of wave length). This unit is commonly used in the SI unit system.
"^^rdf:HTML ;
qudt:id "U150E0890" ;
qudt:hasQuantityKind quantitykind:EnergyDensity ;
qudt:symbol "J/m^4" ;
qudt:uneceCommonCode "B14" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Joule per Quartic Meter" ;
skos:prefLabel "joule-per-quartic-meter" ;
.
unit:J-PER-MOL-K
rdf:type qudt:DerivedUnit ;
rdf:type qudt:MolarHeatCapacityUnit ;
rdf:type qudt:Unit ;
qudt:abbreviation "J/(mol-K)" ;
qudt:code "0915" ;
qudt:conversionMultiplier 1.0e0 ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "t of one mole of substance, under standard conditions (not standard temperature and pressure STP). the standard molar entropy is usually given the symbol S, and has units of joules per mole kelvin (\\(J mol^{-1} K^{-1}). Unlike standard enthalpies of formation, the value of S is an absolute. That is, an element in its standard state has a nonzero value of S at room temperature."^^rdf:HTML ;
qudt:id "U-150-0915" ;
qudt:hasQuantityKind quantitykind:MolarHeatCapacity ;
qudt:symbol "J mol^{-1} K^{-1}" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Joule per Mole Kelvin" ;
skos:prefLabel "joule-per-mole-kelvin" ;
.
unit:J-SEC
rdf:type qudt:AngularMomentumUnit ;
rdf:type qudt:DerivedUnit ;
qudt:abbreviation "J s" ;
qudt:code "2036" ;
qudt:conversionMultiplier 1.0e0 ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "The joule-second is a unit equal to a joule multiplied by a second, used to measure action or angular momentum. The joule-second is the unit used for Planck's constant.
"^^rdf:HTML ;
qudt:id "U-150-2036" ;
qudt:symbol "J s" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Joule Second" ;
skos:prefLabel "joule-second" ;
.
unit:J-SEC-PER-MOL
rdf:type qudt:MechanicsUnit ;
qudt:abbreviation "J s mol^{-1}" ;
qudt:conversionMultiplier "1"^^xsd:double ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "Joule Second per Mole is a unit for 'Molar Angular Momentum' expressed as \\(J s mol^{-1}\\).
"^^rdf:HTML ;
qudt:hasQuantityKind quantitykind:MolarAngularMomentum ;
qudt:symbol "J s mol^{-1}" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Joule Second per Mole" ;
skos:prefLabel "joule-second-per-mole" ;
.
unit:JOULE
rdf:type qudt:DerivedUnit ;
rdf:type qudt:EnergyAndWorkUnit ;
rdf:type qudt:ThermalEnergyUnit ;
qudt:abbreviation "J" ;
qudt:baseUnitDimensions "m^2.kg.s^{-2}" ;
qudt:code "0885" ;
qudt:conversionMultiplier 1.0e0 ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "The SI unit of work or energy, defined to be the work done by a force of one newton acting to move an object through a distance of one meter in the direction in which the force is applied. Equivalently, since kinetic energy is one half the mass times the square of the velocity, one joule is the kinetic energy of a mass of two kilograms moving at a velocity of \\(1 m/s\\).
"^^rdf:HTML ;
qudt:exactMatch unit:N-M ;
qudt:id "U-150-0885" ;
qudt:latexDefinition "\\(\\text{J}\\ \\equiv\\ \\text{joule}\\ \\equiv\\ \\text{CV}\\ \\equiv\\ \\text{coulomb.volt}\\ \\equiv\\ \\frac{\\text{eV}}{1.602\\ 10^{-19}}\\ \\equiv\\ \\frac{\\text{electron.volt}}{1.602\\ 10^{-19}}\\)" ;
qudt:longDescription "The SI unit of work or energy, defined to be the work done by a force of one newton acting to move an object through a distance of one meter in the direction in which the force is applied. Equivalently, since kinetic energy is one half the mass times the square of the velocity, one joule is the kinetic energy of a mass of two kilograms moving at a velocity of 1 m/s. This is the same as 107 ergs in the CGS system, or approximately 0.737 562 foot-pound in the traditional English system. In other energy units, one joule equals about 9.478 170 x 10-4 Btu, 0.238 846 (small) calories, or 2.777 778 x 10-4 watt hour. The joule is named for the British physicist James Prescott Joule (1818-1889), who demonstrated the equivalence of mechanical and thermal energy in a famous experiment in 1843. " ;
qudt:hasQuantityKind quantitykind:EnergyAndWork ;
qudt:symbol "J" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Joule" ;
skos:exactMatch ;
skos:prefLabel "joule" ;
prov:wasInfluencedBy ;
.
unit:K
rdf:type qudt:BaseUnit ;
rdf:type qudt:SI-Unit ;
rdf:type qudt:TemperatureUnit ;
rdf:type qudt:Unit ;
qudt:abbreviation "K" ;
qudt:code "0930" ;
qudt:conversionMultiplier "1"^^xsd:double ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "The SI base unit of temperature, previously called the degree Kelvin. One kelvin represents the same temperature difference as one degree Celsius. In 1967 the General Conference on Weights and Measures defined the temperature of the triple point of water (the temperature at which water exists simultaneously in the gaseous, liquid, and solid states) to be exactly 273.16 kelvins. Since this temperature is also equal to 0.01 u00b0C, the temperature in kelvins is always equal to 273.15 plus the temperature in degrees Celsius. The kelvin equals exactly 1.8 degrees Fahrenheit. The unit is named for the British mathematician and physicist William Thomson (1824-1907), later known as Lord Kelvin after he was named Baron Kelvin of Largs.
"^^rdf:HTML ;
qudt:id "U-000-0930" ;
qudt:hasQuantityKind quantitykind:ThermodynamicTemperature ;
qudt:symbol "K" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Kelvin" ;
skos:exactMatch ;
skos:prefLabel "kelvin" ;
prov:wasInfluencedBy ;
.
unit:K-PER-HR
rdf:type qudt:CGS-Unit ;
rdf:type qudt:TemperaturePerTimeUnit ;
rdf:type qudt:Unit ;
qudt:abbreviation "K / h" ;
qudt:conversionMultiplier "3600.0"^^xsd:double ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "Kelvin per Hour is a C.G.S System unit for 'Temperature Per Time' expressed as \\(K / h\\).
"^^rdf:HTML ;
qudt:hasQuantityKind quantitykind:TemperaturePerTime ;
qudt:symbol "K / h" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Kelvin per Hour" ;
skos:prefLabel "kelvin-per-hour" ;
.
unit:K-PER-MIN
rdf:type qudt:CGS-Unit ;
rdf:type qudt:TemperaturePerTimeUnit ;
rdf:type qudt:Unit ;
qudt:abbreviation "K / m" ;
qudt:conversionMultiplier "60.0"^^xsd:double ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "Kelvin per Minute is a C.G.S System unit for 'Temperature Per Time' expressed as \\(K / m\\).
"^^rdf:HTML ;
qudt:hasQuantityKind quantitykind:TemperaturePerTime ;
qudt:symbol "K / m" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Kelvin per Minute" ;
skos:prefLabel "kelvin-per-minute" ;
.
unit:K-PER-SEC
rdf:type qudt:TemperaturePerTimeUnit ;
rdf:type qudt:Unit ;
qudt:abbreviation "K / s" ;
qudt:conversionMultiplier "1.0"^^xsd:double ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "Kelvin per Second is a unit for 'Temperature Per Time' expressed as \\(K / s\\).
"^^rdf:HTML ;
qudt:hasQuantityKind quantitykind:TemperaturePerTime ;
qudt:symbol "K/s" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Kelvin per Second" ;
skos:prefLabel "kelvin-per-second" ;
.
unit:K-PER-T
rdf:type qudt:ThermodynamicsUnit ;
rdf:type qudt:Unit ;
qudt:abbreviation "K T^{-1}" ;
qudt:conversionMultiplier "1"^^xsd:double ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "Kelvin per Tesla is a unit for 'Temperature Per Magnetic Flux Density' expressed as \\(K T^{-1}\\).
"^^rdf:HTML ;
qudt:hasQuantityKind quantitykind:TemperaturePerMagneticFluxDensity ;
qudt:symbol "K T^{-1}" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Kelvin per Tesla" ;
skos:prefLabel "kelvin-per-tesla" ;
.
unit:K-PER-W
rdf:type qudt:DerivedUnit ;
rdf:type qudt:ThermalResistanceUnit ;
rdf:type qudt:Unit ;
qudt:abbreviation "K/W" ;
qudt:code "0945" ;
qudt:conversionMultiplier 1.0e0 ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description """Thermal resistance is a heat property and a measure of a temperature difference by which an object or material resists a heat flow (heat per time unit or thermal resistance). Thermal resistance is the reciprocal thermal conductance.
Absolute thermal resistance is the temperature difference across a structure when a unit of heat energy flows through it in unit time. It is the reciprocal of thermal conductance. The SI units of thermal resistance are kelvins per watt or the equivalent degrees Celsius per watt (the two are the same since as intervals)."""^^rdf:HTML ;
qudt:id "U-150-0945" ;
qudt:hasQuantityKind quantitykind:ThermalResistance ;
qudt:symbol "K/W" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Kelvin per Watt" ;
skos:prefLabel "kelvin-per-watt" ;
.
unit:KG-K
rdf:type qudt:DerivedUnit ;
rdf:type qudt:MassTemperatureUnit ;
rdf:type qudt:Unit ;
qudt:abbreviation "kg-K" ;
qudt:code "0990" ;
qudt:conversionMultiplier 1.0e0 ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "Kilogram Kelvin is a unit for 'Mass Temperature' expressed as \\(kg-K\\).
"^^rdf:HTML ;
qudt:id "U-150-0990" ;
qudt:hasQuantityKind quantitykind:MassTemperature ;
qudt:symbol "kg-K" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Kilogram Kelvin" ;
skos:prefLabel "kilogram-kelvin" ;
.
unit:KW
rdf:type qudt:DerivedUnit ;
rdf:type qudt:HeatFlowRateUnit ;
rdf:type qudt:PowerUnit ;
rdf:type qudt:Unit ;
qudt:abbreviation "kW" ;
qudt:code "1030" ;
qudt:conversionMultiplier 1000.0e0 ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "The kilowatt is a derived unit of power in the International System of Units (SI), The unit, defined as 1,000 joule per second, measures the rate of energy conversion or transfer.
"^^rdf:HTML ;
qudt:id "U150-1030" ;
qudt:hasQuantityKind quantitykind:Power ;
qudt:symbol "kW" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Kilowatt" ;
skos:exactMatch ;
skos:prefLabel "kilowatt" ;
prov:wasInfluencedBy ;
.
unit:KiloCAL
rdf:type qudt:CGS-Unit ;
rdf:type qudt:EnergyAndWorkUnit ;
rdf:type qudt:ThermalEnergyUnit ;
rdf:type qudt:Unit ;
qudt:abbreviation "kcal" ;
qudt:code "0965" ;
qudt:conversionMultiplier "4184"^^xsd:double ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "Kilocalorie} is a C.G.S System unit for \\textit{Energy And Work expressed as \\(kcal\\).
"^^rdf:HTML ;
qudt:id "U150-0965" ;
qudt:hasQuantityKind quantitykind:EnergyAndWork ;
qudt:hasQuantityKind quantitykind:ThermalEnergy ;
qudt:symbol "kcal" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Kilocalorie" ;
skos:exactMatch ;
skos:prefLabel "kilocalorie" ;
prov:wasInfluencedBy ;
.
unit:KiloCAL-PER-CM-SEC-DEG_C
rdf:type qudt:DerivedUnit ;
rdf:type qudt:SI-Unit ;
rdf:type qudt:ThermalConductivityUnit ;
qudt:abbreviation "kilocal-per-cm-sec-degc" ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:hasQuantityKind quantitykind:ThermalConductivity ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Kilocalorie per Centimeter Second Degree Celsius" ;
.
unit:KiloCAL-PER-CM2-DEG_C
rdf:type qudt:CGS-Unit ;
rdf:type qudt:DerivedUnit ;
rdf:type qudt:ThermalConductivityUnit ;
qudt:abbreviation "cal/(cm-s-degC)" ;
qudt:code "0270" ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "Calorie per Centimeter Second Degree Celsius is a C.G.S System unit for 'Thermal Conductivity' expressed as \\(cal/(cm-s-degC)\\).
"^^rdf:HTML ;
qudt:id "U-150-0270" ;
qudt:hasQuantityKind quantitykind:ThermalConductivity ;
qudt:symbol "cal/(cm-s-degC)" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Calorie per Centimeter Second Degree Celsius" ;
skos:prefLabel "calorie-per-centimeter-second-degree-celsius" ;
.
unit:KiloCAL-PER-GM-DEG_C
rdf:type qudt:CGS-Unit ;
rdf:type qudt:DerivedUnit ;
rdf:type qudt:SpecificHeatCapacityUnit ;
rdf:type qudt:Unit ;
qudt:abbreviation "kcal/(gm-degC)" ;
qudt:code "0280" ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "Calorie per Gram Degree Celsius is a C.G.S System unit for 'Specific Heat Capacity' expressed as \\(kcal/(gm-degC)\\).
"^^rdf:HTML ;
qudt:id "U-150-0280" ;
qudt:hasQuantityKind quantitykind:SpecificHeatCapacity ;
qudt:symbol "kcal/(gm-degC)" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Calorie per Gram Degree Celsius" ;
skos:prefLabel "calorie-per-gram-degree-celsius" ;
.
unit:KiloCAL-PER-MIN
rdf:type qudt:CGS-Unit ;
rdf:type qudt:DerivedUnit ;
rdf:type qudt:HeatFlowRateUnit ;
rdf:type qudt:Unit ;
qudt:abbreviation "kcal/min" ;
qudt:code "0290" ;
qudt:conversionMultiplier "69.7333333"^^xsd:double ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "Kilocalorie per Minute} is a C.G.S System unit for \\textit{Heat Flow Rate} and \\textit{Power expressed as \\(kcal/min\\).
"^^rdf:HTML ;
qudt:id "U-150-0290" ;
qudt:hasQuantityKind quantitykind:HeatFlowRate ;
qudt:hasQuantityKind quantitykind:Power ;
qudt:symbol "kcal/min" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Kilocalorie Per Minute" ;
skos:prefLabel "kilocalorie-per-minute" ;
.
unit:KiloCAL-PER-MOL-DEG_C
rdf:type qudt:CGS-Unit ;
rdf:type qudt:DerivedUnit ;
rdf:type qudt:MolarHeatCapacityUnit ;
rdf:type qudt:Unit ;
qudt:abbreviation "kcal/(mol-degC)" ;
qudt:code "0300" ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "Kilocalorie per Mole Degree Celsius is a C.G.S System unit for 'Molar Heat Capacity' expressed as \\(kcal/(mol-degC)\\).
"^^rdf:HTML ;
qudt:id "U-150-0300" ;
qudt:hasQuantityKind quantitykind:MolarHeatCapacity ;
qudt:symbol "kcal/(mol-degC)" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Kilocalorie per Mole Degree Celsius" ;
skos:prefLabel "kilocalorie-per-mole-degree-celsius" ;
.
unit:KiloCAL-PER-SEC
rdf:type qudt:CGS-Unit ;
rdf:type qudt:DerivedUnit ;
rdf:type qudt:HeatFlowRateUnit ;
rdf:type qudt:Unit ;
qudt:abbreviation "kcal/s" ;
qudt:code "0305" ;
qudt:conversionMultiplier "4184"^^xsd:double ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "Kilocalorie per Second} is a C.G.S System unit for \\textit{Heat Flow Rate} and \\textit{Power expressed as \\(kcal/s\\).
"^^rdf:HTML ;
qudt:id "U150-0305" ;
qudt:hasQuantityKind quantitykind:HeatFlowRate ;
qudt:hasQuantityKind quantitykind:Power ;
qudt:symbol "kcal/s" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Kilocalorie Per Second" ;
skos:prefLabel "kilocalorie-per-second" ;
.
unit:LB-DEG_F
rdf:type qudt:DerivedUnit ;
rdf:type qudt:ImperialUnit ;
rdf:type qudt:MassTemperatureUnit ;
rdf:type qudt:Unit ;
qudt:abbreviation "lb-degF" ;
qudt:code "1405" ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "Pound Degree Fahrenheit is an Imperial unit for 'Mass Temperature' expressed as \\(lb-degF\\).
"^^rdf:HTML ;
qudt:id "U-150-1405" ;
qudt:hasQuantityKind quantitykind:MassTemperature ;
qudt:symbol "lb-degF" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Pound Degree Fahrenheit" ;
skos:prefLabel "pound-degree-fahrenheit" ;
.
unit:LB-DEG_R
rdf:type qudt:DerivedUnit ;
rdf:type qudt:ImperialUnit ;
rdf:type qudt:MassTemperatureUnit ;
rdf:type qudt:Unit ;
qudt:abbreviation "lb-degR" ;
qudt:code "1410" ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "Pound Degree Rankine is an Imperial unit for 'Mass Temperature' expressed as \\(lb-degR\\).
"^^rdf:HTML ;
qudt:id "U-150-1410" ;
qudt:hasQuantityKind quantitykind:MassTemperature ;
qudt:symbol "lb-degR" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Pound Degree Rankine" ;
skos:prefLabel "pound-degree-rankine" ;
.
unit:LB-MOL-DEG_F
rdf:type qudt:CGS-Unit ;
rdf:type qudt:DerivedUnit ;
rdf:type qudt:MassAmountOfSubstanceTemperatureUnit ;
rdf:type qudt:ThermodynamicsUnit ;
rdf:type qudt:Unit ;
qudt:abbreviation "lb-mol-degF" ;
qudt:code "1470" ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "Pound Mole Degree Fahrenheit is a C.G.S System unit for 'Mass Amount Of Substance Temperature' expressed as \\(lb-mol-degF\\).
"^^rdf:HTML ;
qudt:id "U-030-1470" ;
qudt:id "U-150-1470" ;
qudt:hasQuantityKind quantitykind:MassAmountOfSubstanceTemperature ;
qudt:symbol "lb-mol-degF" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Pound Mole Degree Fahrenheit" ;
skos:prefLabel "pound-mole-degree-fahrenheit" ;
.
unit:M-K
rdf:type qudt:DerivedUnit ;
rdf:type qudt:LengthTemperatureUnit ;
rdf:type qudt:Unit ;
qudt:abbreviation "m K" ;
qudt:code "1095" ;
qudt:conversionMultiplier 1.0e0 ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "Meter Kelvin is a unit for 'Length Temperature' expressed as \\(m K\\).
"^^rdf:HTML ;
qudt:id "U-150-1095" ;
qudt:hasQuantityKind quantitykind:LengthTemperature ;
qudt:symbol "m K" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Meter Kelvin" ;
skos:prefLabel "meter-kelvin" ;
.
unit:M-K-PER-W
rdf:type qudt:DerivedUnit ;
rdf:type qudt:ThermalResistivityUnit ;
rdf:type qudt:Unit ;
qudt:abbreviation "K-m/W" ;
qudt:code "0940" ;
qudt:conversionMultiplier 1.0e0 ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "Meter Kelvin per Watt is a unit for 'Thermal Resistivity' expressed as \\(K-m/W\\).
"^^rdf:HTML ;
qudt:id "U-150-0940" ;
qudt:hasQuantityKind quantitykind:ThermalResistivity ;
qudt:symbol "K-m/W" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Meter Kelvin per Watt" ;
skos:prefLabel "meter-kelvin-per-watt" ;
.
unit:M-PER-K
rdf:type qudt:DerivedUnit ;
rdf:type qudt:LinearThermalExpansionUnit ;
rdf:type qudt:Unit ;
qudt:abbreviation "m-per-k" ;
qudt:code "2044" ;
qudt:conversionMultiplier 1.0e0 ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:id "U-150-2044" ;
qudt:hasQuantityKind quantitykind:LinearThermalExpansion ;
qudt:symbol "m/K" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Meter per Kelvin" ;
skos:prefLabel "meter-per-kelvin" ;
.
unit:M2-K
rdf:type qudt:AreaTemperatureUnit ;
rdf:type qudt:DerivedUnit ;
rdf:type qudt:SpaceAndTimeUnit ;
rdf:type qudt:Unit ;
qudt:abbreviation "m^{2}-K" ;
qudt:code "1710" ;
qudt:conversionMultiplier 1.0e0 ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "Square Meter Kelvin is a unit for 'Area Temperature' expressed as \\(m^{2}-K\\).
"^^rdf:HTML ;
qudt:id "U-150-1710" ;
qudt:hasQuantityKind quantitykind:AreaTemperature ;
qudt:symbol "m^{2}-K" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Square Meter Kelvin" ;
skos:prefLabel "square-meter-kelvin" ;
.
unit:M2-K-PER-W
rdf:type qudt:DerivedUnit ;
rdf:type qudt:ThermalInsulanceUnit ;
rdf:type qudt:Unit ;
qudt:abbreviation "(K^{2})m/W" ;
qudt:code "0955" ;
qudt:conversionMultiplier "1.0"^^xsd:double ;
qudt:conversionMultiplier 1.0e0 ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "Square Meter Kelvin per Watt is a unit for 'Thermal Insulance' expressed as \\((K^{2})m/W\\).
"^^rdf:HTML ;
qudt:id "U-150-0955" ;
qudt:id "U-150-1710" ;
qudt:hasQuantityKind quantitykind:ThermalInsulance ;
qudt:symbol "(K^{2})m/W" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Square Meter Kelvin per Watt" ;
skos:prefLabel "square-meter-kelvin-per-watt" ;
prov:wasInfluencedBy ;
.
unit:M2-PER-K
rdf:type qudt:AreaThermalExpansionUnit ;
rdf:type qudt:DerivedUnit ;
rdf:type qudt:Unit ;
qudt:abbreviation "m2-per-k" ;
qudt:code "2048" ;
qudt:conversionMultiplier 1.0e0 ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:id "U-150-2048" ;
qudt:hasQuantityKind quantitykind:AreaThermalExpansion ;
qudt:symbol "m^2/K" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Square Meter per Kelvin" ;
skos:prefLabel "square-meter-per-kelvin" ;
.
unit:M2-PER-SEC
rdf:type qudt:DerivedUnit ;
rdf:type qudt:KinematicViscosityUnit ;
rdf:type qudt:ThermalDiffusivityUnit ;
qudt:abbreviation "m^{2} s^{-1}" ;
qudt:code "1720" ;
qudt:conversionMultiplier 1.0e0 ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "Metres squared per second is the SI derived unit of angular momentum, defined by distance or displacement in metres multiplied by distance again in metres and divided by time in seconds. The unit is written in symbols as m2/s or m2u00b7s-1 or m2s-1. It may be better understood when phrased as \"metres per second times metres\", i.e. the momentum of an object with respect to a position.
"^^rdf:HTML ;
qudt:id "U-150-1720" ;
qudt:hasQuantityKind quantitykind:AreaPerTime ;
qudt:symbol "m^2 s^{-1}" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Square Meter per Second" ;
skos:prefLabel "square-meter-per-second" ;
.
unit:M3-PER-K
rdf:type qudt:DerivedUnit ;
rdf:type qudt:Unit ;
rdf:type qudt:VolumeThermalExpansionUnit ;
qudt:abbreviation "m3-per-k" ;
qudt:code "2060" ;
qudt:conversionMultiplier 1.0e0 ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:id "U-150-2060" ;
qudt:hasQuantityKind quantitykind:VolumeThermalExpansion ;
qudt:symbol "m^{3}/K" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Cubic Meter per Kelvin" ;
skos:prefLabel "cubic-meter-per-kelvin" ;
.
unit:MOL-DEG_C
rdf:type qudt:AmountOfSubstanceTemperatureUnit ;
rdf:type qudt:CGS-Unit ;
rdf:type qudt:DerivedUnit ;
rdf:type qudt:ThermodynamicsUnit ;
qudt:abbreviation "mol-degC" ;
qudt:code "2004" ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "Mole Degree Celsius is a C.G.S System unit for 'Temperature Amount Of Substance' expressed as \\(mol-degC\\).
"^^rdf:HTML ;
qudt:id "U-150-2004" ;
qudt:hasQuantityKind quantitykind:TemperatureAmountOfSubstance ;
qudt:symbol "mol-degC" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Mole Degree Celsius" ;
skos:prefLabel "mole-degree-celsius" ;
.
unit:MegaHZ-PER-K
rdf:type qudt:CGS-Unit ;
rdf:type qudt:ThermodynamicsUnit ;
rdf:type qudt:Unit ;
qudt:abbreviation "MHz K^{-1}" ;
qudt:conversionMultiplier 1.0E6 ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "Mega Hertz per Kelvin is a C.G.S System unit for 'Inverse Time Temperature' expressed as \\(MHz K^{-1}\\).
"^^rdf:HTML ;
qudt:hasQuantityKind quantitykind:InverseTimeTemperature ;
qudt:symbol "MHz K^{-1}" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Mega Hertz per Kelvin" ;
skos:prefLabel "mega-hertz-per-kelvin" ;
.
unit:MilliDEG_C
rdf:type qudt:DerivedUnit ;
rdf:type qudt:SI-Unit ;
rdf:type qudt:TemperatureUnit ;
qudt:abbreviation "milliDegC" ;
qudt:baseUnitDimensions "K" ;
qudt:conversionMultiplier 1E-03 ;
qudt:conversionOffset "273.15"^^xsd:double ;
qudt:description "Millidegree Celsius is a scaled unit of measurement for temperature.
"^^rdf:HTML ;
qudt:guidance ;
qudt:guidance ;
qudt:isScalingOf unit:DegC ;
qudt:latexDefinition "millieDegree Celsius" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Millidegree Celsius" ;
skos:exactMatch ;
skos:prefLabel "millidegree-celsius" ;
prov:wasInfluencedBy ;
.
unit:PA-PER-K
rdf:type qudt:ThermodynamicsUnit ;
qudt:abbreviation "pascal-per-kelvin" ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:hasQuantityKind quantitykind:PressureCoefficient ;
qudt:symbol "Pa/K" ;
qudt:symbolToken "Pa/K"^^xsd:token ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Pascal per Kelvin" ;
skos:prefLabel "pascal-per-kelvin" ;
.
unit:PER-K
rdf:type qudt:ThermodynamicsUnit ;
qudt:abbreviation "/K" ;
qudt:conversionMultiplier "1"^^xsd:double ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "Per Kelvin Unit is a demominator unit with dimensions \\(/k\\).
"^^rdf:HTML ;
qudt:hasQuantityKind quantitykind:InverseTemperature ;
qudt:symbol "m^{-1} K^{-1}" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Per Meter Kelvin Unit" ;
skos:prefLabel "per-kelvin-unit" ;
.
unit:PER-M-K
rdf:type qudt:ThermodynamicsUnit ;
qudt:abbreviation "/m.k" ;
qudt:conversionMultiplier "1"^^xsd:double ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "Per Meter Kelvin Unit is a demominator unit with dimensions \\(/m.k\\).
"^^rdf:HTML ;
qudt:hasQuantityKind quantitykind:InverseLengthTemperature ;
qudt:symbol "m^{-1} K^{-1}" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Per Meter Kelvin Unit" ;
skos:prefLabel "per-meter-kelvin-unit" ;
.
unit:PER-PA
rdf:type qudt:ThermodynamicsUnit ;
qudt:abbreviation "per-pascal" ;
qudt:hasQuantityKind quantitykind:IsothermalCompressibility ;
qudt:symbol "1/Pa" ;
qudt:symbolToken "1/Pa"^^xsd:token ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Per Pascal" ;
skos:prefLabel "Per Pascal" ;
.
unit:THM
rdf:type qudt:EnergyAndWorkUnit ;
rdf:type qudt:ThermalEnergyUnit ;
rdf:type qudt:Unit ;
qudt:abbreviation "therm (US)" ;
qudt:code "1830" ;
qudt:conversionMultiplier "105480400"^^xsd:double ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "Therm (symbol \\(thm\\)) is a non-SI unit of heat energy. It was defined in the United States in 1968 as the energy equivalent of burning 100 cubic feet of natural gas at standard temperature and pressure. In the US gas industry its SI equivalent is defined as exactly \\(100,000 BTU59^\\circ F\\) or \\(105.4804 megajoules\\). Public utilities in the U.S. use the therm unit for measuring customer usage of gas and calculating the monthly bills.
"^^rdf:HTML ;
qudt:id "U150-1830" ;
qudt:hasQuantityKind quantitykind:EnergyAndWork ;
qudt:hasQuantityKind quantitykind:ThermalEnergy ;
qudt:symbol "thm" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Therm US" ;
skos:prefLabel "therm-us" ;
prov:wasInfluencedBy ;
.
unit:TON-PER-FG
rdf:type qudt:CGS-Unit ;
rdf:type qudt:HeatFlowRateUnit ;
qudt:abbreviation "t/fg" ;
qudt:code "1870" ;
qudt:conversionMultiplier "3517"^^xsd:double ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "12000 btu per hour"^^rdf:HTML ;
qudt:id "U-150-1870" ;
qudt:hasQuantityKind quantitykind:HeatFlowRate ;
qudt:hasQuantityKind quantitykind:Power ;
qudt:symbol "t/fg" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Ton of Refrigeration" ;
skos:exactMatch ;
skos:prefLabel "ton-of-refrigeration" ;
prov:wasInfluencedBy ;
.
unit:ThermEEC
rdf:type qudt:Unit ;
qudt:abbreviation "therm-eec" ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:hasQuantityKind quantitykind:EnergyAndWork ;
qudt:hasQuantityKind quantitykind:ThermalEnergy ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
.
unit:W
rdf:type qudt:AcousticsUnit ;
rdf:type qudt:DerivedUnit ;
rdf:type qudt:HeatFlowRateUnit ;
qudt:abbreviation "W" ;
qudt:code "1920" ;
qudt:conversionMultiplier 1.0e0 ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "The SI unit of power. Power is the rate at which work is done, or (equivalently) the rate at which energy is expended. One watt is equal to a power rate of one joule of work per second of time. This unit is used both in mechanics and in electricity, so it links the mechanical and electrical units to one another. In mechanical terms, one watt equals about 0.001 341 02 horsepower (hp) or 0.737 562 foot-pound per second (lbf/s). In electrical terms, one watt is the power produced by a current of one ampere flowing through an electric potential of one volt. The name of the unit honors James Watt (1736-1819), the British engineer whose improvements to the steam engine are often credited with igniting the Industrial Revolution.
"^^rdf:HTML ;
qudt:id "U150E1920" ;
qudt:latexDefinition "\\text{W}\\ \\equiv\\ \\text{watt}\\ \\equiv\\ \\frac{\\text{J}}{\\text{s}}\\ \\equiv\\ \\frac{\\text{joule}}{\\text{second}}\\ \\equiv\\ \\frac{\\text{N.m}}{\\text{s}}\\ \\equiv\\ \\frac{\\text{newton.metre}}{\\text{second}}\\ \\equiv\\ \\text{V.A}\\ \\equiv\\ \\text{volt.amp}\\ \\equiv\\ \\Omega\\text{.A}^{2}\\ \\equiv\\ \\text{ohm.amp}^{2}" ;
qudt:hasQuantityKind quantitykind:HeatFlowRate ;
qudt:hasQuantityKind quantitykind:Power ;
qudt:symbol "W" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Watt" ;
skos:exactMatch ;
skos:prefLabel "watt" ;
prov:wasInfluencedBy ;
.
unit:W-M2
rdf:type qudt:DerivedUnit ;
rdf:type qudt:ThermodynamicsUnit ;
rdf:type qudt:Unit ;
qudt:abbreviation "Wm^{2}" ;
qudt:code "1950" ;
qudt:conversionMultiplier "1.0"^^xsd:double ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "Watt Meter Squared is a unit of irradiance defined as the power received per area. This is a unit in the category of Energy flux. It is also known as watts per square meter, watt per square metre, watts per square metre, watt/square meter, watt/square metre. This unit is commonly used in the SI unit system.
"^^rdf:HTML ;
qudt:id "U-150-1950" ;
qudt:hasQuantityKind quantitykind:Irradiance ;
qudt:hasQuantityKind quantitykind:PowerArea ;
qudt:symbol "W m^2" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Watt Meter Squared" ;
skos:prefLabel "watt-meter-squared" ;
.
unit:W-PER-K
rdf:type qudt:DerivedUnit ;
rdf:type qudt:ThermalConductivityUnit ;
qudt:abbreviation "w-per-K" ;
qudt:code "1930" ;
qudt:conversionMultiplier "1.0"^^xsd:double ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "Watt Per Meter Per Kelvin (\\(W/mxK\\)) is a unit in the category of Thermal Conductivity.
"^^rdf:HTML ;
qudt:id "U-150-1930" ;
qudt:longDescription "Watt Per Kelvin (\\(W/K\\)) is a unit in the category of Thermal conductivity." ;
qudt:hasQuantityKind quantitykind:ThermalConductivity ;
qudt:symbol "W/K" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Watt per Kelvin" ;
skos:prefLabel "watt-per-meter-kelvin" ;
.
unit:W-PER-M-K
rdf:type qudt:DerivedUnit ;
rdf:type qudt:ThermodynamicsUnit ;
qudt:abbreviation "W-per-MK" ;
qudt:code "1950" ;
qudt:conversionMultiplier "1.0"^^xsd:double ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:id "U-150-1950" ;
qudt:hasQuantityKind quantitykind:ThermalConductivity ;
qudt:symbol "W \\cdot m^{-1} \\cdot K^{-1}" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Watt per Meter Kelvin" ;
skos:prefLabel "watt-per-square-meter" ;
prov:wasInfluencedBy ;
.
unit:W-PER-M2
rdf:type qudt:DerivedUnit ;
rdf:type qudt:PowerPerAreaUnit ;
rdf:type qudt:ThermodynamicsUnit ;
qudt:abbreviation "W/m^2" ;
qudt:code "1950" ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:id "U-150-1950" ;
qudt:hasQuantityKind quantitykind:Irradiance ;
qudt:hasQuantityKind quantitykind:PowerArea ;
qudt:symbol "W/m^2" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Watt per Square Meter" ;
skos:prefLabel "watt-per-square-meter" ;
prov:wasInfluencedBy ;
.
unit:W-PER-M2-K
rdf:type qudt:CoefficientOfHeatTransferUnit ;
rdf:type qudt:DerivedUnit ;
rdf:type qudt:SI-Unit ;
rdf:type qudt:Unit ;
qudt:abbreviation "W/(m^{2}-K)" ;
qudt:code "1955" ;
qudt:conversionMultiplier 1.0e0 ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:description "Watt Per Square Meter Per Kelvin (\\(W m^{-2} K^{-1}\\)) is a unit in the category of Thermal heat transfer coefficient. It is also known as watt/square meter-kelvin. This unit is commonly used in the SI unit system. Watt Per Square Meter Per Kelvin (\\(W m^{-2} K^{-1}\\)) has a dimension of \\(MT^{-1}Q^{-1}\\) where \\(M\\) is mass, \\(T\\) is time, and \\(Q\\) is temperature. This unit is the standard SI unit in this category.
"^^rdf:HTML ;
qudt:id "U-150-1955" ;
qudt:hasQuantityKind quantitykind:CoefficientOfHeatTransfer ;
qudt:symbol "W/(m^{2}-K)" ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Watt per Square Meter Kelvin" ;
skos:prefLabel "watt-per-square-meter-kelvin" ;
.
unit:W-PER-M2-SR
rdf:type qudt:RadianceUnit ;
qudt:conversionMultiplier "1.0"^^xsd:double ;
qudt:conversionOffset "0.0"^^xsd:double ;
qudt:hasQuantityKind quantitykind:PowerAreaPerSolidAngle ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Watt per Square Meter Steradian" ;
prov:wasInfluencedBy ;
.
voag:QUDT-UNITS-VocabCatalogEntry
rdf:type vaem:CatalogEntry ;
rdfs:label "QUDT UNITS Vocab Catalog Entry" ;
.
voag:hasCatalogEntry
rdf:type owl:ObjectProperty ;
rdfs:label "has catalog entry" ;
.
voag:hasLicenseType
rdf:type owl:ObjectProperty ;
rdfs:label "has license type"@en-US ;
.
voag:withAttributionTo
rdf:type owl:ObjectProperty ;
rdfs:label "with attribution to" ;
.
vaem:GMD_QUDT-UNITS-THERMODYNAMICS
rdf:type vaem:GraphMetaData ;
dct:author "Ralph Hodgson" ;
dct:contributor "Daniel Mekonnen" ;
dct:contributor "David Price" ;
dct:contributor "James E. Masters" ;
dct:contributor "Steve Ray" ;
dct:created "2011-04-20"^^xsd:date ;
dct:creator "Ralph Hodgson" ;
dct:description "Thermodynamics Units Ontology Version 2.0" ;
dct:modified "2017-08-07T01:46:56.578+01:00"^^xsd:dateTime ;
dct:rights "The QUDT Ontologies are issued under a Creative Commons Attribution Share Alike 3.0 United States License. Attribution should be made to NASA Ames Research Center and TopQuadrant, Inc." ;
dct:subject "Thermodynamics Units Ontology" ;
dct:title "Thermodynamics Units Ontology Version 2.0" ;
vaem:hasGraphRole vaem:VocabularyGraph ;
vaem:hasLicenseType voag:CC-SHAREALIKE_3PT0-US ;
vaem:hasLicenseType ;
vaem:hasOwner vaem:QUDT ;
vaem:hasSteward vaem:QUDT ;
vaem:intent "The intent of this graph is the specification of the base units for thermodynamics." ;
vaem:isMetadataFor ;
vaem:latestPublishedVersion "http://qudt.org/doc/2017/DOC_VOCAB-UNITS-THERMODYNAMICS-v2.0.html"^^xsd:anyURI ;
vaem:logo "http://www.linkedmodel.org/lib/lm/images/logos/qudt_logo-300x110.png"^^xsd:anyURI ;
vaem:name "qudt" ;
vaem:namespace "http://qudt.org/vocab/unit/" ;
vaem:namespacePrefix "unit" ;
vaem:owner "qudt.org" ;
vaem:revision "2.0" ;
vaem:title "Thermodynamics Units Ontology Version 2.0" ;
vaem:turtleFileURL "http://qudt.org/2.0/vocab/VOCAB_QUDT-UNITS-THERMODYNAMICS-v2.0.ttl"^^xsd:anyURI ;
vaem:usesNonImportedResource dct:abstract ;
vaem:usesNonImportedResource dct:author ;
vaem:usesNonImportedResource dct:contributor ;
vaem:usesNonImportedResource dct:created ;
vaem:usesNonImportedResource dct:description ;
vaem:usesNonImportedResource dct:modified ;
vaem:usesNonImportedResource dct:rights ;
vaem:usesNonImportedResource dct:source ;
vaem:usesNonImportedResource dct:subject ;
vaem:usesNonImportedResource dct:title ;
vaem:usesNonImportedResource voag:QUDT-Attribution ;
vaem:usesNonImportedResource ;
vaem:usesNonImportedResource skos:closeMatch ;
vaem:usesNonImportedResource skos:exactMatch ;
vaem:usesNonImportedResource prov:wasInfluencedBy ;
vaem:withAttributionTo voag:QUDT-Attribution ;
vaem:withAttributionTo ;
rdfs:isDefinedBy ;
rdfs:isDefinedBy unit:thermodynamics ;
rdfs:label "Thermodynamics Units Ontology Version 2.0" ;
owl:versionIRI ;
.
skos:closeMatch
rdf:type rdf:Property ;
.
skos:exactMatch
rdf:type rdf:Property ;
.